About The VAT
VAT is an acronym for Variable Allocation Table. What it actually is is a large chunk of RAM holding the attributes of every variable on the calculator. The VAT's size is constantly in flux: when you create a variable, the VAT's size is instantly increased to accomodate the new entry. When variables are deleted, the VAT shrinks as the entries for those variables are removed.
The VAT starts immediately before the end of the hardware stack and is divided into two parts. The first part holds the names of real, complex, matrix, picture, GDB, and equation type variables. This region starts immediately after the Hardware Stack at the fixed address SymTable.
The second part holds programs, lists, groups, and AppVars. The beginning is stored in the variable (ProgPtr) and ends at (PTemp)
Structure Of VAT Entries
Each VAT entry is a structure of several elements, but there is a twist: the entries are written backwards!
Program, AppVar, and Group
|Variable name - Eight tokens maximum||NL||Page||DAH||DAL||Ver||T2||T|
|List name - 5 tokens max||tVarLst||NL||Page||DAH||DAL||Ver||T2||T|
Real, Complex, Matrix, Equation, GDB, and Picture
|$00||Second name token||First name token||Page||DAH||DAL||Ver||T2||T|
The object type and system effects:
- Object type
- If a graph equation, then it's active if set.
- Variable is used during graphing if set.
- Variable is designated for link transfer if set.
- Reserved for future use
- Version number. If a future TI-83 Plus version introduces a new variable format, this is used to prevent sending that variable to an older version.
- DAL, DAH
- Pointer to the data. DAL is the least-significant byte, and DAH is the most-significant.
- The ROM page the variable is archived on. If the variable is in RAM, then 0.
- The length of the name. For lists,
tVarLstis included in the value.
- Number of a formula attached to a list, or 0 if no formula.
The structure of a list formula is
Searching The VAT
To scan the VAT, step through each entry from SymTable to (PTemp)
+1 with HL or IX linearly.
Search for and display all programs. Try modifying it to account for archived programs.
RES AppTextSave, (IY + AppFlags) b_call(_ClrLCDFull) LD HL, (ProgPtr) ; Start of Symbol Table for programs MainLoop: LD DE, 0 LD (CurRow), DE LD C, 7 ; Counter. We can display 7 variables per screen FindLoop: LD DE, (PTemp) ; Check to see if we're at the end of the symbol table OR A SBC HL, DE JR Z, Done JR C, Done ADD HL, DE ; Restore HL LD A, (HL) ; Check the [T] of entry, take appropriate action AND $1F ; Bitmask off bits 7-5 to get type only. CP ProgObj JR Z, IsNormalProg CP ProtProgObj JR NZ, Skip LD A, '#' ; We'll use a hash to signify a protected program... JR DispStatus IsNormalProg: LD A, ' ' ; ...or space padding for a normal program DispStatus: b_call(_PutC) ; Display protection status ; At this point, HL -> [T], so we'll move back six bytes to [NL] LD DE, -6 ADD HL, DE LD B, (HL) ; Store number of characters in name for DJNZ DispNameLoop: DEC HL LD A, (HL) b_call(_PutC) DJNZ DispNameLoop DEC HL ; Move back one byte so HL -> [T] of next entry b_call(_NewLine) DEC C ; Subtract counter JR NZ, FindLoop PUSH HL b_call(_GetKey) ; Press any key... b_call(_ClrLCDFull) POP HL JR MainLoop Skip: ; Skip an entry OR A LD DE, 6 SBC HL, DE LD E, (HL) ; Put name length in E to skip INC E ; Add 1 to go to [T] of next entry SBC HL, DE JR FindLoop Done: b_call(_GetKey) SET AppTextSave, (IY + AppFlags) RET ; That's all folks!